Precision Injection Mould of Air Condition Roller with ABS Multi
Yaxing mould is able to offer the full range of service from mold
designing, making, plastic part molding to printing, assembly,
package, and shipping arrangement.
Mold and die are used interchangeably to describe the tooling
applied to produce plastic parts.
They are typically constructed from pre-hardened steel, hardened
steel, aluminum, and/or beryllium-copper alloy. Of these materials,
hardened steel molds are the most expensive to make, but offer the
user a long lifespan, which offsets the cost per part by spreading
it over a larger quantity.
For low volumes or large components, pre-hardened steel molds
provide a less wear-resistant and less expensive option.
The most economical molds are produced out of aluminum.
When designed and built using CNC machines or Electrical Discharge
Machining processes, these molds can economically produce tens of
thousands to hundreds of thousands of parts.
Injection molding is the most commonly used manufacturing process
for the fabrication of plastic parts.
A wide variety of products are manufactured using injection
molding, which vary greatly in their size, complexity, and
The injection molding process requires the use of an injection
molding machine, raw plastic material, and a mold. The plastic is
melted in the injection molding machine and then injected into the
mold, where it cools and solidifies into the final part. The steps
in this process are described in greater detail in the next
Injection molding is used to produce thin-walled plastic parts for
a wide variety of applications, one of the most common being
Plastic housing is a thin-walled enclosure, often requiring many ribs and bosses on the interior.
These housings are used in a variety of products including
household appliances, consumer electronics, power tools, and as
Other common thin-walled products include different types of open
containers, such as buckets.
Injection molding is also used to produce several everyday items
such as toothbrushes or small plastic toys. Many medical devices,
including valves and syringes, are manufactured using injection
molding as well.
Yaxing provides quick-turn thermoplastic injection molding often
used for prototyping, bridge tooling and short-run manufacturing up
to 10,000+ parts.
We use advanced aluminum alloy molds that allow us to eliminate the
costly and time-consuming custom engineering that normally goes
into the development of tooling.
Quick-turn injection molding uses the industry standard production
process for parts, so it’s an excellent predictor of
manufacturability when you move to large-scale production.
Custom Plastic Injection Molding: Higher Quality Parts at Lower
Note that beryllium copper is often used in areas of the mold that
require fast heat removal or places that see the most shear heat