HTPE Plastic Electronic Injection Mould of Foot Pad for Stereo with
The injection molding process uses a granular plastic that is
gravity fed from a hopper.
A screw-type plunger forces the material into a heated chamber,
called a barrel, where it is melted.
The plunger continues to advance, pushing the polymer through a
nozzle at the end of the barrel that is
pressed against the mold. The plastic enters the mold cavity
through a gate and runner system.
After the cavity is filled, a holding pressure is maintained to
compensate for material shrinkage as it cools.
At this same time, the screw turns so that the next shot is moved
into a ready position, and the barrel retracts as the next shot is
heated. Because the mold is kept cold, the plastic solidifies soon
after the mold is filled. Once the part inside the mold cools
completely, the mold opens, and the part is ejected.
The next injection molding cycle starts the moment the mold closes
and the polymer is injected into the mold cavity.
UG, ProE, Auto CAD, Solidworks, etc.
Prototypes, Mold design, Mold making, Mold tesing, etc.
1.2343/1.2311/SKD61, S136, P20, H13, 738H, 2344, HPM7, PX5, PXA30
PP, PA6, PLA, AS, ABS, PE, PC, POM, PVC, PET, PS, TPE / TPR, HIPS
HASCO ,DME ,LKM,JLS standard
Cold runner, hot runner
Mold hot runner
FISA, YUDO, Mold Master etc
Mold strandard Parts
DME, HASCO, MISUMI etc.
300, 000--1, 000, 000 shots
Mold Hot Treatment
quencher, nitridation, tempering,etc.
Mold Cooling System
water cooling or Beryllium bronze cooling, etc.
EDM, texture, high gloss polishing
Hardness of the steel
High speed CNC, standard CNC, EDM, Wire cutting, Grinder,
Lathe, Milling machine, plastic injection machine
50 sets /month
Standard exporting Wooden case with Steel Frame